Skip to product information
1 of 3

Costume Cat Snap Card

Costume Cat Snap Card

Cutout Size
~30mm Width by ~40mm Height

Regular price $22.00 AUD
Regular price Sale price $22.00 AUD
Sale Sold out
Tax included. Shipping calculated at checkout.
Style

Create custom cat earrings, keyrings and more with our Costume Cat Snap Card set! Featuring a detailed cat base cutter and costume options like Dracula, ghost, and Frankenstein, this set is perfect for crafting unique polymer clay designs. Ideal for makers of all levels, it’s your go-to for adorable customisable creations!

Sizing
Size of finished base costume cat (not including keyring tab): 30mm x 40mm

Depth
These cutters are design for slightly thinner clay. The indent will appear after 1mm of clearance. The maximum clay depth supported is 3mm. We recommend using very thin clay for the detailings.

Assembly
To avoid warping your clay during assembly, it's best to bake each piece first and then assemble with Bake & Bond or Liquid Clay, and then bake again to set the adhesive. (You can also use super glue).

Tips
Put a dot of  clear UV resin on the eye to really make it pop!
For keyrings, carefully add the keyring after baking.

Note: This item does not include the metal keyring shown in the preview.

 

Our Process

Hand-designed and printed in our home studio in Brunswick East, Melbourne. These cutters are designed for clay makers and crafters. They are 3D printed using PLA (a biodegradable and biocompatible plastic made from renewable resources).

Product Care

PLA softens at high-temperatures, so avoid exposing to direct sunlight, and avoid high temperatures like boiling or very hot water.

These cutters are not dishwasher or oven safe. To clean your cutters, wash them gently under soapy lukewarm water. To remove any clay stuck in narrow edges, use a toothpick, X-acto knife, or toothbrush. Do not stress product beyond intended use. Do not apply horizontal pressure.

Product Photography

Please note product photos are rendered images and should be considered as an accurate representation of the items shape only.

Actual products are 3D printed with either an FDM filament printer or SLA resin printer and will have layer lines and potentially small imperfections or artefacts left by the printing process.

Items are quality checked and any deemed of unacceptable are removed from stock and put into misprints packs.

Tips

For best results, work and cut your polymer clay on a ceramic or glass tile.

For cutters with embossing details:
The embossed elements work best on clay that has been rolled out to 3-4mm thick.

We recommend using corn flour/baby powder on cutters to stop the clay from sticking to the cutter. Place cutters on polymer clay and press with firm and even pressure. Once the cutter has reached your working surface, gently jiggle the cutter while pressing down to ensure that the clay has separated completely. Remove cutter from the top edges.

For uneven designs, gently lift the bigger side first and slowly angle up until your cutter is completely off the clay.

Due to the nature of 3D printing, some tiny bumps may be present on the cutters where the filaments join. The marks of the bumps are very light and can be easily removed from the clay before or after curing.

View full details