Ornate Pendant Clay Cutter
Ornate Pendant Clay Cutter
Cutout Size
~29mm
Width
by
~41mm
Height
Couldn't load pickup availability
Are you ready to step into a magical world of enchanting elegance? Look no further than our new Ornate collection! Discover a wonderland of curious critters and fanciful folk patterns that will transform your jewellery into stunning works of art. Let your imagination run wild and add a touch of whimsy to your creations with these intricately detailed cutters. Get ready to dazzle your friends and followers with your unique and enchanting style!
Clay Depth
Our Ornate collection is designed to press the clay to create varying heights. Because of this, depending on your clay thickness, you might experience a slightly rougher cut on the outer edges of your cutout. Try varying the thickness of your slab to find what suits you. We've found that there is a sweet-spot between 2mm and 3mm slab thickness to get the perfect balance between detail and a clean cut.
Our Process
Our Process
Hand-designed and printed in our home studio in Brunswick East, Melbourne. These cutters are designed for clay makers and crafters. They are 3D printed using PLA (a biodegradable and biocompatible plastic made from renewable resources).
Product Care
Product Care
PLA softens at high-temperatures, so avoid exposing to direct sunlight, and avoid high temperatures like boiling or very hot water.
These cutters are not dishwasher or oven safe. To clean your cutters, wash them gently under soapy lukewarm water. To remove any clay stuck in narrow edges, use a toothpick, X-acto knife, or toothbrush. Do not stress product beyond intended use. Do not apply horizontal pressure.
Product Photography
Product Photography
Please note product photos are rendered images and should be considered as an accurate representation of the items shape only.
Actual products are 3D printed with either an FDM filament printer or SLA resin printer and will have layer lines and potentially small imperfections or artefacts left by the printing process.
Items are quality checked and any deemed of unacceptable are removed from stock and put into misprints packs.
Tips
Tips
For best results, work and cut your polymer clay on a ceramic or glass tile.
For cutters with embossing details:
The embossed elements work best on clay that has been rolled out to 3-4mm thick.
We recommend using corn flour/baby powder on cutters to stop the clay from sticking to the cutter. Place cutters on polymer clay and press with firm and even pressure. Once the cutter has reached your working surface, gently jiggle the cutter while pressing down to ensure that the clay has separated completely. Remove cutter from the top edges.
For uneven designs, gently lift the bigger side first and slowly angle up until your cutter is completely off the clay.
Due to the nature of 3D printing, some tiny bumps may be present on the cutters where the filaments join. The marks of the bumps are very light and can be easily removed from the clay before or after curing.
