Number Stamp Set Snap Card
Number Stamp Set Snap Card
Count on creativity to elevate your creations with our new Number Stamp Set! Precision-designed for perfect impressions, we’ve got you covered in both small and micro sizes, ideal for personalising with dates, anniversaries, or even your lucky digits. Stamp in style and make every design a numbered masterpiece!
Size options:
Small stamp numbers are ~5.5mm height.
Micro stamp numbers are ~3.5mm height.
Also check the gallery for a handy size guide!
What’s a snap card?
Snap Cards are a fun new Claylab design made to give you a nostalgic feeling of snapping out your new tools on arrival! Unlike other Claylab snap card sets, the Number sets must be printed with the snap card due to design restrictions and to ensure that no letters are missed in the packing process. If you’d like us to pre-snap these so they arrive as individual letters, please leave a note in your cart. (Please note that as the snap card is designed to be very easy to snap apart, some letters may snap from the frame during shipping.)
What the heck is a Pokey Pal?
Each Number Set comes with a free Pokey Pal. The Pokey Pal is a tool designed specifically for use with our Number and Alpha Stamps. We’ve designed the stamps with a teeny tiny base to give you more visibility and accuracy while stamping, so the Pokey Pal gives you additional accessibility to hold the stamp while working. Just pop the desired stamp on the end of your Pal and craft away!
Have some letters that you know you'll use over and over? Grab some additional Pokey Pals and leave your numbers and letters attached for ease of use! Click here to add more Pokey Pals to your cart!
Share
Our Process
Our Process
Hand-designed and printed in our home studio in Brunswick East, Melbourne. These cutters are designed for clay makers and crafters. They are 3D printed using PLA (a biodegradable and biocompatible plastic made from renewable resources).
Product Care
Product Care
PLA softens at high-temperatures, so avoid exposing to direct sunlight, and avoid high temperatures like boiling or very hot water.
These cutters are not dishwasher or oven safe. To clean your cutters, wash them gently under soapy lukewarm water. To remove any clay stuck in narrow edges, use a toothpick, X-acto knife, or toothbrush. Do not stress product beyond intended use. Do not apply horizontal pressure.
Product Photography
Product Photography
Please note product photos are rendered images and should be considered as an accurate representation of the items shape only.
Actual products are 3D printed with either an FDM filament printer or SLA resin printer and will have layer lines and potentially small imperfections or artefacts left by the printing process.
Items are quality checked and any deemed of unacceptable are removed from stock and put into misprints packs.
Tips
Tips
For best results, work and cut your polymer clay on a ceramic or glass tile.
For cutters with embossing details:
The embossed elements work best on clay that has been rolled out to 3-4mm thick.
We recommend using corn flour/baby powder on cutters to stop the clay from sticking to the cutter. Place cutters on polymer clay and press with firm and even pressure. Once the cutter has reached your working surface, gently jiggle the cutter while pressing down to ensure that the clay has separated completely. Remove cutter from the top edges.
For uneven designs, gently lift the bigger side first and slowly angle up until your cutter is completely off the clay.
Due to the nature of 3D printing, some tiny bumps may be present on the cutters where the filaments join. The marks of the bumps are very light and can be easily removed from the clay before or after curing.
Excellent!