Stitch Racoon Snap Card
Stitch Racoon Snap Card
Cutout Size
~25mm
Width
by
~35mm
Height
Couldn't load pickup availability
Craft adorable, layered Racoon designs with our Stitch Racoon Cutter Set! Perfect for creating unique earrings or keyrings, this versatile set lets you mix and match colours for endless customisation. Designed to work beautifully with textures like leather or knit, you can easily achieve that hand-stitched look. Whether you’re crafting for yourself or making gifts, this set will add a touch of charm to any project.
Sizing
Size of finished racoon (not including keyring tab): 25mm x 35mm
Size of full snap card: Approx. 90mm x 90mm
Depth
These cutters are design for slightly thinner clay. The indent will appear after 1mm of clearance. The maximum clay depth supported is 3mm. We recommend using very thin clay for the eyes and nose dots as well as the ear detailing.
Assembly
To avoid warping your clay during assembly, it's best to bake each piece first and then assemble with Bake & Bond or Liquid Clay, and then bake again to set the adhesive. (You can also use super glue).
For keyrings, carefully add the keyring after baking.
Cutter pieces included in snap card
1. Foldable keyring body
2. Earring Body
3. Eyes & Nose Dots
4. Mask
5. Ear & Eye Detail
This item does not include the metal keyring shown in the preview.
Texture
Want that leather or knit textured look? Grab one of our texture rollers here.
Our Process
Our Process
Hand-designed and printed in our home studio in Brunswick East, Melbourne. These cutters are designed for clay makers and crafters. They are 3D printed using PLA (a biodegradable and biocompatible plastic made from renewable resources).
Product Care
Product Care
PLA softens at high-temperatures, so avoid exposing to direct sunlight, and avoid high temperatures like boiling or very hot water.
These cutters are not dishwasher or oven safe. To clean your cutters, wash them gently under soapy lukewarm water. To remove any clay stuck in narrow edges, use a toothpick, X-acto knife, or toothbrush. Do not stress product beyond intended use. Do not apply horizontal pressure.
Product Photography
Product Photography
Please note product photos are rendered images and should be considered as an accurate representation of the items shape only.
Actual products are 3D printed with either an FDM filament printer or SLA resin printer and will have layer lines and potentially small imperfections or artefacts left by the printing process.
Items are quality checked and any deemed of unacceptable are removed from stock and put into misprints packs.
Tips
Tips
For best results, work and cut your polymer clay on a ceramic or glass tile.
For cutters with embossing details:
The embossed elements work best on clay that has been rolled out to 3-4mm thick.
We recommend using corn flour/baby powder on cutters to stop the clay from sticking to the cutter. Place cutters on polymer clay and press with firm and even pressure. Once the cutter has reached your working surface, gently jiggle the cutter while pressing down to ensure that the clay has separated completely. Remove cutter from the top edges.
For uneven designs, gently lift the bigger side first and slowly angle up until your cutter is completely off the clay.
Due to the nature of 3D printing, some tiny bumps may be present on the cutters where the filaments join. The marks of the bumps are very light and can be easily removed from the clay before or after curing.
